Home>Museum News>NASA's Crew Compartment Trainer being prepared for shipment to Air Force's national museum
Story at a Glance
NASA's first Shuttle Crew Compartment Trainer being prepared for shipment to Air Force's national museum Plans call for the museum to build a mock-up of the payload bay and allow the public to have a look into the cockpit and mid-deck areas The trainer is scheduled to arrive at the museum later this summer
HOUSTON, TX (07/2012) -- The Crew Compartment Trainer is shrink-wrapped by NASA officials on July 9, 2012, in preparation for its move from Johnson Space Center to the National Museum of the U.S. Air Force. (NASA Photo)
The Crew Compartment Trainer (CCT) is a high-fidelity representation of the orbiter crew station that was used primarily for on-orbit crew training and engineering evaluations. Here, astronauts learned how to operate many of the orbiter sub-systems in more than 20 different classes. (U.S. Air Force photo)
DAYTON, Ohio -- Conceptual drawing of the NASA Space Shuttle Crew Compartment Trainer (CCT) exhibit at the National Museum of the U.S. Air Force. The CCT is a high-fidelity representation of the Space Shuttle Orbiter crew station that was used primarily for on-orbit crew training and engineering evaluations. (September 2012 udpate)
by Rob Bardua
National Museum of the U.S. Air Force
7/17/2012 - HOUSTON -- After many months of intensive planning, the first steps have been put in motion to move NASA's first Shuttle Crew Compartment Trainer (CCT-1) from Johnson Space Center (JSC) to the National Museum of the U.S. Air Force.
For more than 30 years, CCT-1 was housed in Johnson Space Center's Space Vehicle Mockup Facility (SVMF) and was used to train crews from STS-1 through STS-132 as a high-fidelity representation of the Space Shuttle Orbiter crew station for on-orbit crew training and engineering evaluations. Here, astronauts learned how to operate many of the orbiter sub-systems in more than 20 different classes.
Three trainers were built to train astronauts for space missions - CCT-1, CCT-2 and a Full Fuselage Trainer (FFT), which also contained a crew compartment. CCT-1 is scheduled to arrive later this summer at the National Museum of the U.S. Air Force.
In order to prepare the more than 24,000-pound trainer for flight to the museum, engineers first needed to design a specialized adapter to allow it to be transported on NASA's Super Guppy aircraft. According to SVMF Mockup Manager Jill MacGregor, planning to move an object that wasn't designed to be moved again after it had arrived at JSC has proven quite challenging.
"Really the most difficult part of moving the CCT-1 is coordinating all of the different parties involved," said MacGregor. "You've got folks from Johnson Space Center ( JSC) transportation who are going to box-up all of the small items; you've got JSC Riggers who do all of the lifting and the truck moves; you have aircraft loadmasters and engineers that have to be involved with how to orient the trainer into the aircraft, how to chain it down and how to analyze all of the loads to make sure it flies safely."
The shipping process began with the removal of all of the items from the inside of CCT-1, which will be shipped to the museum separately. The trainer was then recently shrink-wrapped to protect it from the elements. Current plans call for CCT-1 to be loaded onto a truck soon and stored in Light Manufacturing Facility near Ellington Field Joint Reserve Base, and later mounted onto the specialized adapter for its flight to Ohio. From there, the CCT-1 will be transported over to Ellington Field, loaded into NASA's Super Guppy aircraft and then flown to the museum.
"CCT-1 was designed to turn vertical and it has some structure on the bottom that is not even, so that makes it a challenge to put it on a truck and drive it up to Ellington Field, while keeping it low enough to the ground to avoid hitting trees along the way," MacGregor said. "And all of the moves have to done in the middle of the night because of traffic concerns."
After arrival, museum and NASA technicians will offload the trainer, reassemble the interior and place it on interim display in the Cold War Gallery. Later, CCT-1 will be moved to a new Space Gallery in the museum's planned fourth building.
According to National Museum of the U.S. Air Force Director Lt. Gen. (Ret.) Jack Hudson, the CCT-1 will be a great addition to the museum because the Air Force has been a major partner with NASA in space.
"CCT-1 will really help us tell the story of the Air Force in space, and by doing that it will motivate, educate and inspire our youth toward the Air Force, as well as in careers in science, technology, engineering and math (STEM)," said Hudson.
According to Hudson, plans call for the museum to build a mock-up of the payload bay and when the CCT-1 exhibit is completed, it will allow the public to have a look into the cockpit and mid-deck areas of a shuttle and learn how astronauts trained for their missions.
"Visitors will actually be able to walk up inside the payload bay mockup and see everything up close, and also really get an idea what the crew station was like, how big it was and how it was designed," Hudson said.
The new Space Gallery, where the CCT-1 will eventually reside, is a part of a multi-phase, long term expansion plan and will house the museum's growing space collection. The gallery will include a Titan IV space launch vehicle, Mercury, Gemini and Apollo spacecraft, and many recently retired NASA artifacts such as a nose cap assembly, landing gear strut and a variety of astronaut equipment. In addition, a range of satellites and related items will showcase the Air Force's vast reconnaissance, early warning, communications and other space-based capabilities.
The Air Force Museum Foundation, an IRS 501(c)(3) organization chartered to assist the National Museum of the United States Air Force with the development and expansion of facilities, is in the process of raising the funds to meet the growing requirements of the museum. Currently $38.9 million has been secured by the Foundation for the fourth building project, which is expected to cost an estimated $48.7 million. The fourth building will house the Space Gallery, Presidential Aircraft Gallery and Global Reach Gallery featuring cargo and tanker aircraft.
According to MacGregor, museum visitors should be excited about acquiring the trainer as their newest space artifact.
"I think the folks in Dayton should be thrilled to have this trainer," said MacGregor. "It's been invaluable to the space shuttle program, and so it's neat that you are going to have it there for the public to see."
The National Museum of the United States Air Force is located on Springfield Street, six miles northeast of downtown Dayton. It is open 9 a.m. to 5 p.m. seven days a week (closed Thanksgiving, Christmas and New Year's Day). Admission and parking are free.
NOTE TO PUBLIC: For more information, please contact the National Museum of the U.S. Air Force at (937) 255-3286.
NOTE TO MEDIA: For more information, contact Rob Bardua in the National Museum of the United States Air Force Public Affairs Division at (937) 255-1386.